Looking for:
Roxio creator 2012 pro serial key free download |
.Roxio creator 2012 pro serial key free download
If the file is "filename. Did you save them from MyDVD? Since I also have Creator on a drive, sometime today I will go save something from C and see if I can load it back into C for you.
Thank you for your help! Is that the information you needed? I was trying to figure out if I should output my project to a different file format, but I'm not sure if that is correct to do or how that would help me. I want to be able to open the many projects I've made with Creator if I want to revise or reburn them. I called the company who sells the upgrades and asked if I could open Creator projects with upgraded versions and they said yes, but I'm a little hesitant to believe what they told me because they said yes to all of my questions.
Of course, finding where to buy that program will be tough! It's not readily available. I also tried to run Creator under the compatibility mode with Windows I changed the compatibility setting to Windows 7 for Roxio since that is what I had when Roxio ran just fine, but it didn't work. The program would run for about a minute and then the message "Videowave 12 has stopped working" would still pop up and Roxio shut down. That keeps happening no matter what I do to troubleshoot.
It's frustrating for me because I'm not a digital guru and lack the technical knowledge to know how to fix glitches. Fortunately, this forum has members who know quite a bit more than I do! Yes, I understand that it has no movie files in it because I've had issues where I've changed the pathway and it couldn't find the movie files.
I didn't know to output the movies I've made and honestly don't really understand what that means. Now I realize I might not be able to open years and years of movies I made of my daughters and I'm getting frustrated and truthfully, teary. I just don't have enough knowledge to understand the best next steps of how to solve my problem.
I'm thinking the best bet is to buy Creator pro and pray it opens what I created in the past. Am I able to output my movies now and save them properly for future use? Am I understanding correctly that I won't have a menu or anything on those movies since MyDVD added that , but I'll have the video segments, title slides, and transitions? I just don't understand why Creator worked fine when I got this computer that was loaded with Windows The program didn't close down or hang up or anything.
I'm concerned that Creator will close down in videowave like Creator and I'll have wasted my money, but it's a risk I'll take. I ran Creator and made a very simple project in Videowave. Just two short clips with a transition in between. I then sent the project to MyDVD, and saved the project. I then booted on a different drive with Creator installed. I made sure my source video clips were available on the same path as before, started MyDVD , and opened the. Even the original transition was there.
So it looks as though C will open C's saved project files, as long as the source clips are still available on the same path. It also appears that you should still have the transitions too, as long as C hasn't dropped any. I don't think it will have dropped things, as C was made in the days of "making Roxio better".
There are lots of things that Microsoft has done differently in Windows 10, and C probably ran until it bumped into one of the new Microsoft things, then tripped and fell on its nose. I don't know what tripped it - neither Corel nor Microsoft tell us their 'trade secrets'. Please don't apologize for your lack of tech expertise. We are all born knowing nothing and have to build on that.
I've sent you a private message [PM] suggesting places you might be able to buy a used Creator Please go to the top, right corner of the forum page and look for an envelope icon. Click on it to receive the message. Thanks for giving it a shot, Brendon. That is good news if not too many transitions were used in the Creator projects Bekki created.
Transitions were the biggest problem of backward compatibility, but it wasn't they only one. I do use transitions between new video topics, but nothing out of the ordinary so like you said, hopefully they all will be available in the new program. Thank you so much for running that test for me. It really warms my heart that people like you are out there take the time to do acts of kindness like that.
Also - thank you for understanding my lack of digital knowledge. I fall into the category of knowing "just enough to be dangerous. Thank goodness for the forums because usually I can find my answer by reading through them. As for Windows 10 - that is a mystery and I haven't been overly thrilled with it. Creates problems for me, but I use it at work and it made sense to have it compatible at home. I'm going to get Creator and then I'll update my post to let everyone who's helped me out know if the program works on my computer and if I can open all of the home movies filled with video clips only a mother will want to watch that I made over the years.
I was reading what you wrote grandpabruce. Maybe transitions were what tripped me up when I tried to run Roxio using Windows 7 compatibility mode. Sometimes it videowave would close down after a transition, but sometimes it closed right in the middle of playing a video segment. I'll never know the cause of the hiccup! You need to be a member in order to leave a comment. Sign up for a new account in our community. It's easy! Already have an account? Sign in here. I'm concerned that Creator will close down in videowave like Creator and I'll have wasted my money, but it's a risk I'll take.
I ran Creator and made a very simple project in Videowave. Just two short clips with a transition in between. I then sent the project to MyDVD, and saved the project. I then booted on a different drive with Creator installed. I made sure my source video clips were available on the same path as before, started MyDVD , and opened the.
Even the original transition was there. So it looks as though C will open C's saved project files, as long as the source clips are still available on the same path. It also appears that you should still have the transitions too, as long as C hasn't dropped any. I don't think it will have dropped things, as C was made in the days of "making Roxio better".
There are lots of things that Microsoft has done differently in Windows 10, and C probably ran until it bumped into one of the new Microsoft things, then tripped and fell on its nose. I don't know what tripped it - neither Corel nor Microsoft tell us their 'trade secrets'. Please don't apologize for your lack of tech expertise. We are all born knowing nothing and have to build on that. I've sent you a private message [PM] suggesting places you might be able to buy a used Creator Please go to the top, right corner of the forum page and look for an envelope icon.
Click on it to receive the message. Thanks for giving it a shot, Brendon. That is good news if not too many transitions were used in the Creator projects Bekki created. Transitions were the biggest problem of backward compatibility, but it wasn't they only one.
I do use transitions between new video topics, but nothing out of the ordinary so like you said, hopefully they all will be available in the new program. Thank you so much for running that test for me. It really warms my heart that people like you are out there take the time to do acts of kindness like that. Also - thank you for understanding my lack of digital knowledge. I fall into the category of knowing "just enough to be dangerous.
Thank goodness for the forums because usually I can find my answer by reading through them. As for Windows 10 - that is a mystery and I haven't been overly thrilled with it. Creates problems for me, but I use it at work and it made sense to have it compatible at home. I'm going to get Creator and then I'll update my post to let everyone who's helped me out know if the program works on my computer and if I can open all of the home movies filled with video clips only a mother will want to watch that I made over the years.
I was reading what you wrote grandpabruce. Maybe transitions were what tripped me up when I tried to run Roxio using Windows 7 compatibility mode. Sometimes it videowave would close down after a transition, but sometimes it closed right in the middle of playing a video segment.
I'll never know the cause of the hiccup! You need to be a member in order to leave a comment. Sign up for a new account in our community. It's easy! Already have an account? Sign in here. Creator Sales Questions Search In. Sign in to follow this Followers 2. Question Bekki 1. Report post. Posted September 28, Thanks for your help! Share this post Link to post Share on other sites. Recommended Posts. Can you post a link to the free download?
Brendon Hello Bekki, Don't be surprised, there isn't one. Regards, Brendon. Bekki 1. Thanks for your search and for your feedback! I really appreciate your guidance and help. If your looking for one I would pick Creator Pro and be sure about the name! Posted September 29, Hi, Brendon. I did save them from MyDVD. Again, thanks for taking the time to try various things to help me. That is so thoughtful! I apologize for my lack of technical knowledge. Hello Bekki, I'm back.
Posted September 29, edited. Edited September 29, by grandpabruce.
No comments:
Post a Comment